Home > Locations > Brighton

Window and Door Replacement in Brighton: Coastal-Grade Frames for Period and Bayside Homes

Facelift for Homes replaces old windows and doors across Brighton, from Edwardian villas near Church Street to 1960s brick veneer homes in North Brighton. New double-glazed windows, entry doors and sliding, French or stacker doors are made to fit your existing openings, so there’s no renovation and no rebuilding of walls.

Brighton faces Port Phillip Bay and cops salt-laden southerly winds, so we specify marine-grade powder-coated aluminium or well-sealed timber, with stainless steel hardware throughout. Many Brighton streets sit under Bayside City Council heritage overlays, and we check your property’s planning status before we quote. Every window and door is custom-made in Australia and installed by our own builders and carpenters, with a 15-year warranty.

Get your free measure & quote

Takes 30 seconds. We’ll call you within 1 business day.

Our services

Our Window and Door Replacement Services in Brighton

Brighton’s streets mix Federation double-brick villas, interwar bungalows, Art Deco walk-up flats and big 1960s–80s brick veneer homes, often on the same block. Each era has its own window and door types, and its own way of being replaced. Here’s how we handle each one, all as part of our window replacement in Melbourne and door replacement services.

Same-Opening Window Replacement

We remove the old frame and fit a custom-made window into the existing opening, so your brickwork, plaster and render stay put. It suits Edwardian timber sashes, Californian bungalow casements and 1960s brick veneer awning windows.

Brighton’s Edwardian villas are mostly solid double brick, which needs a different make-good from veneer. Bay-facing frames get marine-grade powder coat and stainless steel hardware.

Double Glazing Upgrades

Most of Brighton’s period homes still have single glazing, which loses heat on still winter nights and lets in noise from Nepean Highway and Beach Road. We upgrade to double glazing using frames sized to your existing openings.

On heritage streets we match the original sightlines and glazing bar pattern. For the front rooms of an Edwardian or bungalow facade, timber frames keep the period look; aluminium suits the rear.

Steel Window Replacement

Art Deco and post-war flats around Middle Brighton and Brighton Beach often still have their original 1940s–60s steel frames. Salt air speeds up the rust, which swells the steel, cracks the glass and stops sashes closing.

We replace them with slim aluminium profiles that keep the thin Deco lines. See our steel window replacement page for how we handle the brickwork around them.

Front and Entry Door Replacement

Many of Brighton’s Edwardian and interwar homes still have their original front doors, often with leadlight sidelights and highlights. After decades of sea air they swell, stick and let draughts in around the frame.

We replace them with custom-made entry doors sized to the existing opening. On heritage streets we match the panel layout and glazing of the original, and existing leadlight sidelights can often be kept. Most like-for-like door swaps are done in a day.

Sliding, French and Stacker Door Replacement

The aluminium sliding doors in Brighton’s 1970s and 80s brick veneer homes are often single-glazed, hard to lock and grinding on worn rollers. Salt grit near the beach makes it worse.

We replace them with double-glazed sliding doors or, for wider openings, stacker doors that open up more of the wall. At the back of a period home, timber or aluminium French doors suit the style better. Every door is made to measure, with tracks and hardware chosen for coastal exposure.

Bifold Doors and Window-to-Door Conversions

Many Brighton homeowners want the rear living area to open onto the garden or pool. As registered builders, we can convert windows to bifolds or stacker doors, including the new lintel, engineering and building permit.

Heritage overlays mostly focus on what’s visible from the street, so rear conversions are often a realistic option even on protected properties.

Local rules and conditions

Brighton Window and Door Regulations: Bayside Heritage Overlays and Coastal Exposure

Two things shape every Brighton window and door job that inland suburbs rarely deal with together: heritage planning controls and salt air.

Heritage Overlays Under the Bayside Planning Scheme

A large share of Brighton sits under a Heritage Overlay, applied through Clause 43.01 of the Bayside Planning Scheme. Under the overlay, external changes to a building can need a planning permit, and that includes changing window or door materials, sizes or profiles on walls you can see from the street. Front doors count too. A same-size, like-for-like swap is treated very differently from swapping timber sashes for wide aluminium frames.

Before we quote, we look up your property on VicPlan to see whether an overlay applies. If it does, we design street-facing windows and front doors to match the original profiles and talk you through whether a permit is likely. Permit decisions are made by Bayside City Council, so always confirm with council before work starts. Our guide to Victorian window permit rules explains the statewide framework.

Building for Salt Air and Bay Winds

Salt carried off Port Phillip Bay settles on frames and hardware and speeds up corrosion. Standard powder coat can chalk and lift, and zinc-plated screws can rust within a few years on streets near Beach Road and the foreshore. For Brighton homes we specify:

If your home still has original steel frames, salt is likely why they’ve rusted.

Not sure what your Brighton home needs?

Book a free measure. We’ll check your heritage status, look at your existing frames and give you a detailed written quote.

Recent work

Recent Window and Door Replacement Projects in Brighton

Aluminium Stacker DGU Door 1 Panel Open (After)-Brighton

Double-Glazed Stacker Doors Onto the Deck, Brighton

Stacker doors · Double glazed · Opens onto the deck · About $10,000

These Brighton homeowners wanted an easier way out to their deck, without all the folding panels of a bifold. We fitted double-glazed stacker doors. Day to day, one panel slides open like a normal door. When guests come over, the panels stack to one side and open up most of the wall. The slim frames and big glass panels bring in more daylight, and the double glazing helps keep the room comfortable all year. All up, it came to about $10,000.

FAQs About Window and Door Replacement in Brighton

You may, if your Brighton property is under a Heritage Overlay and the new windows change the look from the street. Clause 43.01 of the Bayside Planning Scheme can require a permit for external alterations, including new window materials or profiles. A like-for-like replacement is treated differently from a change in style. We check your Brighton address on VicPlan before quoting, but always confirm with Bayside City Council.

Standard aluminium can, but coastal-grade aluminium holds up well in Brighton. Salt off the bay attacks ordinary powder coat and cheap fixings first. We specify marine-grade powder coat and 316 stainless steel hardware for Brighton homes, and a simple rinse with fresh water every few months keeps them looking new.

Yes. In Brighton period homes we can match the original sash proportions, glazing bars and sightlines in new double-glazed timber frames. Original leadlight panels can often be kept and set into the new glazing, or restored separately by a specialist.

Most Brighton homes take 2-3 days on site once the windows are made. Manufacturing takes around 6 weeks after the final measure. Heritage homes needing a permit should allow extra time for council.

Yes. We can make a new front door that matches the panel layout, glazing and sidelights of the original, so it suits a Brighton Edwardian or interwar facade. If your home is under a Heritage Overlay, a front door that changes the look from the street may need a planning permit. We check VicPlan before quoting, but always confirm with Bayside City Council.

Most like-for-like door replacements in Brighton are done in a day once the door is made. Converting a window into a bifold or stacker door takes longer, because it needs a new lintel, engineering and a building permit.

Yes. Double glazing noticeably cuts traffic noise in Brighton homes along Nepean Highway, Beach Road and other busy streets. For the biggest drop, we can add acoustic laminated glass to the panes facing the road. Well-sealed frames matter as much as the glass, since gaps in old frames let most of the noise through.

Free measure and quote

Book a Free Measure and Quote in Brighton

Call 1300 732 523 or send the form and we’ll call you back. We cover all of Brighton and the Bayside area from our Cheltenham base.

Get your free measure & quote

Takes 30 seconds. We’ll call you within 1 business day.

We service all Bayside & Port Phillip suburbs

Albert Park | Aspendale | Beaumaris | Black Rock | Bonbeach | Brighton | Carrum | Chelsea | Cheltenham | Edithvale | Elsternwick | Elwood | Gardenvale | Hampton | Highett | Mentone | Middle Park | Mordialloc | Parkdale | Port Melbourne | Sandringham | South Melbourne | St Kilda |

Request a Quote

NOTICE

Here Comes The Sun! Call us today for a Free Measure & Quote – ask us about the VEU Double Glazing Rebate!